850-877-3474

Sales Service Installation

Since 1980

Download Software        Quick Start Guide

$169.00

The FastAlign® 5100Pro is the lowest priced professional meter around!  If you thought you had to spend an arm and a leg to get a professional satellite meter, think again! 

If you want a low priced, and reliable meter, that will allow you to align virtually any satellite dish, the original FastAlign® 5100Pro by LEXIUM is for you.  We only sell original products because they are better developed, much sturdier, and much more reliable.  This is an original LEXIUM satellite meter.  LEXIUM only makes 1 model of this meter.  Other meters may look the same, but unless it's from WS International, it's not a real LEXIUM meter.  LEXIUM brands are distributed exclusively by WS International in North & South America.  Others may claim they sell an original LEXIUM meter, but unless it came from Westview Satellite, it may not be the same meter!

This all new professional meter by LEXIUM Professional Technology allows the user to quickly and easily locate the desired satellite signal from any C or Ku band satellite.  Use it for Free To Air / FTA, or for DISH Network, DirecTV, Bell, SKY, Sky Mexico, SKY TV, and much more.....

The FastAlign® 5100Pro allows the user to use the parameters of the hundreds of preprogrammed satellite settings in the FastAlign® 5100Pro or the user can edit the transponder, symbol rate, polarity, and LNBF LO frequency all on one screen, including Circular or Linear polarities. 

You can easily update satellite parameters using the meter keyboard.  No need to connect to a computer to update satellite list, however, that option is also provided to easily customize your own satellite list, LNB & LNBF frequency, transponder frequency, etc....  Download the LEXIUM toolbox and software from www.LEXIUM-DVB.com and edit, update, and load your own customized satellite list right from your own PC or laptop.  Click Here to see instructions on how to setup your meter initially for the first use. 

During the initial setup of the FastAlign® 5100Pro, the user can input his latitude and longitude and the meter will automatically calculate the azimuth, elevation, and LNBF polarization of the desired satellite based on the location of the satellite.  With it's unique automatic recalibration function, every time the meter is turned on, it automatically recalibrate for maximum performance.

The satellite meter also features backlight to allow the satellite installer to install in the dark.  The screen is divided to 5 sections. 

1.  The top section provides the Azimuth, Elevation, and LNBF Polarization of the desired satellite. 

2.  The left middle section provides the location of the desired satellite, the transponder frequency, symbol rate, LNBF LO frequency, LNBF polarization ( 13=V / 18=H ), and 22KHz power. 

3.  The right middle section provides signal information such as signal level, signal quality, strength, and signal noise.  If there is no "S" reading, there is no connection between the LNBF and the meter. 

4.  The left bottom section provides the databank of the pre-programmed satellite parameter. 

5.  The left bottom section provides the users Latitude, Longitude, and meter information.