Monitor and record locally and over the internet

at the same time!

Free Shipping

$439.00

Use with AWS-5582-01B

5.8ghz 8 channel camera

• 5.8 GHz wireless technology avoids interference from 900 MHz or 2.4GHz ISM application.
• Monitoring and recording locally and over the internet at the same time.
• Built-in video server connects to the internet.
• Convert any CCTV surveillance into IP surveillance application.
• NVR management software provided.
• • 5.8 GHz frequency has strong immunity of interference from 900 MHz or 2.4GHz ISM applications such as Cordless phone, 802.11b/g Wireless LAN, Bluetooth, Microwave oven, etc.
  • Operating frequency: 5733 ~ 5866 MHz (8 channels).
  • Wireless receiving range is up to 300 feet with clear line-of-sight.
  • Easily convert any CCTV surveillance application into wireless IP surveillance application.
  • Ideal solution in setting surveillance where wire/cable installation is not desired or impossible.
  • Works with RF-Link’s AWS-5882-01B 5.8 GHz wireless camera for local/remote location monitoring and recording.
  • Excellent for industrial and commercial usage.
  • Supports both NTSC/PAL composite formats.
  • High speed hardware-based image compression, generating high quality MJEPG/MPEG-4 streams.
  • High S/N video output and stereo audio output.
  • Video resolution: 720 x 480/NTSC, 720 x 576/PAL (D1).
  • Up to 30 frames/second (D1, CIF, QCIF resolution).
  • PC running Microsoft Windows XP Server Pack 2 or above.
  • DHCP server on network domain is recommended.
  • Microsoft IE browser version 6 or higher is recommended.
  • NVR management software provided.
  • Variable bandwidth control prevents the data saturation on the network.
  • Secure password/username protection restricts access to single user, or the whole internet community.
  • Built-in web-based video live viewer.
  • Built-in Video Server connects to the internet.
  • Change the receiver channel remotely over the internet.
  • Record live stream video to local HDD.
  • Record, Playback and Snapshot.
  • Motion detection.
  • E-mail notification.
  • Periodic timer (Schedule recording).
  • Full-Screen mode or Partitioned-Screen mode.
  • Fixed-Channel mode or Auto-Scan mode (Dwell mode) display.
  • Auto-Scan time can be set freely from 1 to 120 seconds on each connected camera/channel either locally or over the internet.
  • OSD support
  • LED for easy system status display (channel or mode number display).
  • RJ-45 connector for Ethernet.
  • SMA connector for 5.8 GHz antenna.
  • Power jack for 8 ~ 32 VDC input.
  • RCA connector for audio input.
  • BNC connector for video input.
  • A/V jack for audio and video output.
  • SMA connector for wireless PTZ antenna.
  • Wirelessly remote control PTZ over the internet (optional).
  • Terminal block for digital input/output (optional).
  • Terminal block for RS-485 (optional).
  • FCC/IC/CE approved.